All guides

Common messages

Geslar Vezar guide

Updated

When a connection cannot be made, the app writes the reason and what to check under the connection's state; “Details” opens “Error details” with the diagnostic log. The most common messages, by kind:

Signing in failed

  • “Wrong user name, password or one-time code.” — type them again; a token code (e.g. FortiToken) is valid only briefly, so enter a new one when the app asks for it.
  • “The password has expired…”, “The user account is disabled on the server.”, “…not allowed to connect remotely…” — the VPN server's administrator fixes these.
  • “The server did not accept the pre-shared key (PSK)…” — check the PSK (and the group ID) in the profile.
  • “The server did not accept the connection in Main Mode…” (IPsec) — if the PSK and group ID are right, the server expects Aggressive Mode: choose it in Advanced → Mode. Aggressive sends the group ID unencrypted. The other way round, the app tries Main by itself when the server refuses Aggressive.

The server does not answer

  • “The server cannot be found by name (DNS)…”, “…server does not answer…”, “The server is not reachable on port 443…” — check the address and port in the profile and whether the internet works. If they are right, the network you are on (e.g. a hotel or a company) may block VPNs. With IKEv2 servers that also accept IPsec over TCP (e.g. FortiGate), the “TCP port” in the profile's advanced settings helps, together with “Try UDP first”: the connection then moves to TCP by itself when UDP does not get through.
  • “The connection was lost (server or network).” — the app reconnects by itself.

The server's certificate

  • “The server's certificate was not issued by an authority this computer trusts…”, “…is for “…”, not for the address in the profile”, “…has expired or is not valid yet” — the connection is not made, for your safety. Check the address and the computer's date; if they are right, contact the server's administrator. With SSL VPN and SSTP you can review the certificate and accept it yourself (“Review certificate…”) if you know the server is the right one.

The app

  • “Connecting needs the app's service…” — the app is not installed properly; install it again with the installer (MSI), see Installing.
  • “Traffic is blocked until the connection is back. “Disconnect” restores the internet.” — blocking traffic after a dropped connection is on (see Protection and settings).

If a message does not help, see Log and reporting a problem.

Did not find an answer? Write to us