A new profile starts with the server's address: “Set up automatically” recognizes the server (protocol, vendor, port and how you sign in), tells you “Why this?”, and “Save and connect” tries the connection at once and saves the way that works; a weaker way is only offered, marked deprecated.
“Set up automatically” also recognizes pfSense, OPNsense, FortiGate, SonicWall, Check Point and strongSwan-based servers, offers the same connection's settings from another VPN app on the computer, and with OpenVPN Access Server downloads the profile straight from the server.
New look: the connection on top in its state's colour with the last 5 minutes of traffic, networks in the same look, clearer adding of a connection and Settings.
Improved
When connecting fails, the app no longer changes the profile by itself: “Set up automatically” is next to the message, on your click.
Fixed
“Set up automatically” also recognizes newer versions of OpenVPN Access Server.
1.0.2
New
Installs on Windows Server 2019 and Windows 10 version 1809 too (including LTSC 2019).
Fixed
IPsec (IKEv1) to pfSense, OPNsense and other strongSwan-based servers: the connection is made without entering the remote network by hand, and when the server refuses Aggressive Mode the app tries Main by itself.
IPsec (IKEv1): when the server expects Aggressive Mode and the profile uses Main, the message says so clearly and points to the setting.
1.0.1
New
Version numbers: from now on 1.0.0, 1.0.1 and so on (until now 0.1.x); updating works as before.
Expired password: when the server allows a change, the app asks for a new password and connects with it (SSTP, L2TP/IPsec, IKEv2, Cisco AnyConnect).
“Programs only through the VPN” (Protection of this computer): chosen programs, e.g. Remote Desktop, reach the network only through the VPN connection and have no network access without it.
Improved
“Traffic and behavior”: your own DNS servers and suffixes are under the “Custom DNS” checkbox; without it DNS comes from the VPN server.
On Windows older than Windows 10 version 2004 the installation says at once that this Windows version is not supported.
Installing the same version again with a computer management tool (also after an automatic update) no longer reports an error or closes the app.
Fixed
L2TP/IPsec: a connection to a server behind NAT (e.g. Windows Server behind a router) no longer fails saying the server refused the tunnel settings.
Networks (NetBird): a profile with a space in its name can be selected, renamed and removed, and a profile you have not signed in to yet offers the sign-in at once.
Nov 9 – Nov 15, 2026
Vezar 0.1.184–0.1.201
Notes by version
0.1.201
New
SSTP: sign-in with PEAP (e.g. Microsoft NPS) and with a certificate (EAP-TLS, a certificate from Windows), with the sign-in server's certificate checked.
IKEv2: sign-in with PEAP (e.g. Microsoft NPS) and EAP-TLS (a certificate from Windows or a smart card).
Own DNS servers and DNS suffixes in the profile ("Traffic and behavior"), for every connection type; empty = from the VPN server.
"Don’t connect on its own on the company network": in the office the connection does not start by itself (recognised by the network's DNS suffix); connecting by hand works.
Azure: import of the whole package (.zip) from the gateway, with the DNS and routes set for the Azure VPN Client.
WireGuard: import of the .zip file the official WireGuard client exports (a profile per tunnel) and of a file with several servers (a profile for each).
Improved
IPsec (IKEv1 and IKEv2): "Address assignment" — From the server or Manual; the computer address shows only with "Manual".
Fields that depend on another setting show only when they make sense (e.g. "Try UDP first" only with a TCP port).
With "Start with Windows" the app starts right at sign-in to Windows, not only after the other programs.
MikroTik: IPsec (IKEv1) and WireGuard are in the menu too; with IKEv2, settings MikroTik does not have (IKE over TCP) are not offered.
OpenVPN: DNS servers, suffixes and addresses outside the VPN written in the .ovpn file go into the profile on import.
IKEv2 (EAP-TTLS): when the sign-in server's certificate carries another name, the message also names the expected one.
SSTP: a clear message when the server offers no secure key exchange (e.g. MikroTik with default settings), with what the administrator has to turn on.
Fixed
IKEv2: when the server refuses the sign-in because the password expired or the account has no access, the message now says so instead of the general "user or password rejected".
OpenVPN: servers without cipher negotiation (e.g. MikroTik) use the cipher written in the configuration, as the official OpenVPN does.
0.1.196
New
Settings → "Connect at start": the chosen profile connects as soon as the app starts, also with Windows.
IPsec (IKEv1 and IKEv2): "Computer address" and "DNS servers" for servers that do not assign addresses (like "Manually Set" in FortiClient).
IKEv2: "Try UDP first" with a TCP port — the connection starts over UDP and moves to TCP if the server does not answer (like "Auto" in FortiClient).
"Register the connection's address in DNS" in every profile (like "DNS registration" in FortiClient): on, the computer can be found by name in the company network; it can be turned off.
0.1.194
New
"Outside the VPN": networks and server names (e.g. teams.microsoft.com or *.company.com) that go directly instead of through the VPN, even when all traffic goes through the VPN — for every connection type.
"Selected networks" also accepts server names (e.g. intranet.company.com or *.company.com) for OpenVPN, SSTP and SSL VPN.
Fixed
IPsec and L2TP/IPsec: a wrong pre-shared key (PSK) or group ID is now reported as such, not as "server not responding".
0.1.190
Improved
FortiGate with FortiToken (IKEv2): an approval request arrives on your phone when connecting, and when FortiGate asks for a code, you type it in — just like in FortiClient.
The installer and the app are digitally signed (publisher Geslar d.o.o.), so Windows recognizes them as coming from a known publisher.
Updates: a new version is installed only if its installer is correctly signed and the signing certificate has not been revoked.
IPsec (IKEv1 and IKEv2): "IKE UDP port" for servers that accept IKE on a different port (e.g. FortiGate).
IPsec (IKEv1 and IKEv2): SHA-384 and SHA-512 can now be selected for phase 2 traffic integrity, as some FortiGate and other servers require.
IKEv2: PFS (DH group) can be selected for phase 2, like in FortiClient; the default is "Automatic".
IKEv2: the connection check has "Retry interval" and "Retries" (like IKEv1 and FortiClient); the defaults are 5 s and 3 retries.
IKEv2 with user name and password: a Local ID can be entered under "Advanced", for servers (e.g. FortiGate) that pick the connection by it.
FortiGate (IKEv2): "Network ID" for a FortiGate with several tunnels on the same server; shown only in FortiGate profiles.
0.1.185
New
Help: Settings → Support → "Help" opens the user guide on the web, and "How do I add a VPN connection?" when adding a profile takes you straight to the guide for that.
Improved
What's new: the link "All changes on the web" leads to the list of all versions.
English texts in the app now use consistent (American) spelling.
Networks: settings locked by NetBird's policies in Windows are labelled "managed by your administrator", like other administrator policies.
Fixed
Auto-setup: the note that WireGuard can't be detected from outside now appears once (it was repeated or missing).
0.1.184
New
Networks → Advanced: all other Tailscale and NetBird options — offer this computer as an internet exit or share local subnets, NetBird's SSH server, staying connected with no one signed in and automatic client updates (Tailscale), and under "Additional settings" IPv6, MTU and the port.
Networks → Advanced → Accounts: several accounts of the same network on one computer (e.g. work and home) — switch with one click, rename, remove or add an account.
Improved
Policies an administrator sets in Windows (Group Policy) now apply on every computer.
Settings managed by your administrator (Windows Group Policy) look the same throughout the app: the control is greyed out, shows its state and is labelled "managed by your administrator".
The device name in a network is now shown only: the network's server assigns it and the network's administrator changes it.
Nov 2 – Nov 8, 2026
Vezar 0.1.149–0.1.175
Notes by version
0.1.175
New
Networks → Advanced: "Incoming connections" — you choose whether other devices of the network may connect to this computer (remote desktop, SSH, web, ping).
NetBird → Advanced: "Connect when Windows starts".
Improved
Networks: settings your company locked through Tailscale or NetBird policies stay visible — the switch is greyed out and shows its state.
0.1.170
Fixed
WireGuard: a server address typed with a port (e.g. vpn.company.com:51820) is now saved correctly.
0.1.167
New
Settings → Networks: you can also choose PuTTY without installation (portable PuTTY, KiTTY).
Improved
Settings are arranged by area, as in Windows: General, VPN, Networks, About and Support. Descriptions are under "?", and the version and updates are in one place, in "About".
Networks: sign in again with one click — "Sign in" in the header opens the browser on the same server as before (the app remembers it even after signing out). A device key is entered right in the header, and "Another server" opens adding a network.
The selected tab (VPN, Networks, Settings) is marked with a blue line at the top; after a mouse click, buttons no longer show a frame.
Networks: while a network is not connected, there is no empty search below the header.
Fixed
Networks: devices are shown with their name from Tailscale or Headscale, also after you rename them there (until now the computer name was shown).
Networks: after signing out or adding a network, that network is shown, not another one.
0.1.163
New
Networks: SSH per device with its own user, port and key (and certificate), a saved PuTTY session or Tailscale SSH. The first click on SSH opens a short form, and later it connects right away with what was remembered. The app never sees passwords — the SSH program asks for them.
Settings: "SSH program" — automatic, PuTTY or Windows (OpenSSH).
Improved
Networks: the internet exit is chosen next to a device — a globe next to the name shows that the device can be an exit (green while in use), and "⋯" offers "Use as internet exit". While an exit is in use, the header shows a globe with the device's name; a click offers "Stop the internet exit".
Networks: a network's settings open with the gear in the corner of the header, and a new network is added with "+ Add" next to the network choice at the top (instead of "+" next to the search).
"Port" wording in the web setup; the search says "1 device".
Fixed
Networks: clicking a network in the choice at the top always shows it, also when it is turned off while another one runs.
Networks: right after turning a network on, it says "Connected" until the device list loads (instead of "0 of 0 devices").
0.1.161
New
Networks: on a network's page, one line always says where internet traffic goes ("Internet traffic goes directly" or through which device). "Advanced" offers the choice of an exit node (with a recommended one), the local network, networks behind other devices, device names and signing out of the network.
Next to every device in a network, "⋯" offers copying the address and checking the connection (direct or through a relay, with the response time).
Networks: sign in with a device key, without a browser ("I have a device key" when signing in). You get the key from the person who runs the network, and it is never stored.
Networks: next to a device on the network you see right away what can be opened on it (RDP, SSH, Web). A click opens Remote Desktop, SSH or the browser; the "⋯" menu also has "Copy name" and "Copy address".
Networks: for each device you can set what "Web" opens (http or https and the port), in the "⋯" menu → "Set up web…".
Improved
Clicking the tray icon opens the app (with connections and networks) instead of the small window. Quick connect is in the right-click menu: "Connect ▸" with recent or favorite profiles.
The app's version and the update check are now in Settings, in the "Updates" section.
No header repeating the app's name from the window's title bar: more room for connections and networks.
Networks in a narrow window: the "Networks" tab shows the list, a click on a network opens its page, and "Settings ›" that network's settings, arranged in groups. Changing the account and signing out are now buttons.
The "Networks" tab looks like the VPN tab: the state at the top, the number of devices online, this computer's address and where the internet goes; below them the search and the devices on the network (copy address, check connection), and the networks at the bottom. If a network's client is not installed, it has an "Install" button.
Tabs (VPN, Networks, Settings) always open on their start page, and the app opened again starts on the VPN tab.
New names of the plans next to features that need a subscription: Vezar Teams, Vezar Business and Geslar Enterprise.
The VPN and Networks tabs have the same, smaller header and the same search line with a "+" button. A profile that is not connected also shows its server.
The Networks tab shows the selected network with a Turn on/Turn off button; with two networks you choose between them at the top. Networks whose client is not installed are not shown, and you add a new one with the "+" button. The search looks for devices in all networks that are turned on.
Networks: this computer is first in the device list, with its address in the network. A network's "Settings" open directly, and "back" returns to Networks.
Fixed
Confirmation questions (deleting a profile, new WireGuard keys, a settings template, overriding the server's settings) are now really shown and wait for your answer. Before, they did not appear and the action went ahead without asking.
The "Networks" tab and section are shown again also when a network has many devices (e.g. a company network). If the networks' state is temporarily unavailable, the networks stay visible with a note.
While the profile search is open, the bottom menu (VPN, Networks, Settings) stays visible.
0.1.149
New
Server message on connect: when the VPN server's administrator sets one (e.g. on Cisco ASA), the connection waits for your confirmation ("Awaiting confirmation") and nothing goes through the VPN until you choose "Accept". "Disconnect" or 5 minutes without an answer end the connection. An accepted message can be opened again from the connection details.
IPv6 through the VPN: when the VPN server assigns an IPv6 address (Cisco AnyConnect, ocserv, IKEv2, OpenVPN and WireGuard), IPv6 traffic and IPv6 DNS go through the VPN. While all traffic goes through the VPN, IPv6 still cannot bypass it. The IPv6 address and DNS servers are shown in the connection details.
Networks next to the VPN: Tailscale (also with your own Headscale) and NetBird are shown in the "Networks" section. You can turn a network on and off, sign in and see the devices with their address and how they are connected. A network works at the same time as the VPN connection, and leak protection and the traffic block let it through only towards its own devices.
"Add a network" guides you step by step. If the network's official client is not installed, the app downloads it with your consent from the vendor's site, checks its signature and installs it.
A network's exit node and a VPN connection that sends all traffic do not work together: the app asks which one to turn off, and if it happens later, it offers the same in a bar at the top.
Improved
New layout: "+" for a new profile is next to the search, and settings are a page in the app. In a wide window they are at the bottom of the left column, and in a narrow window on the "Settings" tab, next to the "VPN" and "Networks" tabs.
WireGuard without a configuration file (e.g. UniFi): the form guides you through creating keys and entering the public key on the server, and a pre-shared key (PSK) can be entered.
Automatic setup: when it does not recognize the server, it offers importing a configuration or manual entry with the address already filled in.
Fixed
The traffic block after a dropped connection now really stays until the connection is restored or you remove it.
Oct 26 – Nov 1, 2026
Vezar 0.1.115–0.1.134
Notes by version
0.1.134
New
When the VPN server names the company's domains and only part of the traffic goes through the VPN, only the company's names are asked from the company's DNS. Other sites are resolved by the local network, faster and without sending queries to the company.
Choosing a vendor now sets its defaults for IKEv2 too, not only for IPsec: FortiGate separately for FortiOS up to 7.6.4 and from 7.6.5 (new default DH groups) and Windows Server (RRAS). New vendor in the list: MikroTik. A connection to such a server more often works without manual setup.
All DH groups: IPsec (IKEv1) also offers 15, 16, 19, 20, 21 and 31, and IKEv2 also MODP 3072 and 4096 (15 and 16).
Automatic setup: type only the server's address, and in a few seconds the app recognizes the kind of server, the protocol, the port and the settings and proposes a profile. You enter the user name and password and connect. It is also offered for existing profiles (the profile menu) and in the error message when the server does not answer or refuses the settings.
When connecting fails because the server does not answer or refuses the settings, the app tries automatic setup once by itself. If it connects that way, it tells you what it changed, with "Undo"; if it fails, the profile stays as it was. The profile shows what was set up automatically and when, with "Restore the previous settings".
Improved
Short names of computers in the company network (e.g. fileserver instead of the full name) now work in all domains the VPN server sends, not only in the first one. The connection also gets its own domain, as with the Windows VPN.
L2TP/IPsec and SSTP now also get the company's domain from the server, as the Windows VPN does, so short computer names work. With "Selected networks only", the networks the server names also go through the VPN.
When a Cisco AnyConnect server asks for all DNS to go through the VPN, this is now respected (it can be changed in the profile).
Cisco AnyConnect: when all traffic goes through the VPN, the local network stays reachable only if the server allows it, as in Cisco's client.
When the server refuses the offered IPsec settings, the message now also points to the sign-in method (pre-shared key or certificate) and to the vendor.
Fixed
The first connection after an unexpected stop of the app or the computer sometimes reported an error while setting up the network ("CreateIpForwardEntry2"); it now waits until the network adapter is ready.
A new connection no longer takes over the DNS settings of the previous connection when it does not set them itself.
Automatic setup now also recognizes FortiGate SSL VPN on newer FortiOS versions (e.g. on port 1443), with sign-in in the browser when the FortiGate is set up that way.
Automatic setup also recognizes IPsec servers that answer only in Aggressive mode (FortiGate, Cisco), busy IKEv2 servers and SonicWall on port 4433.
An address with a group (e.g. vpn.company.com/accounting) keeps the group in the profile.
0.1.124
Fixed
The cause of the occasional "the app's service has stopped" is removed: when the main window, the small window next to the icon and the connection check talked to the service at the same time, the service could run out of free connections to the app (since 0.1.118 this no longer stops the service, and now it no longer happens at all).
0.1.123
Improved
A connection error can be dismissed: ✕ on the message, in the small window next to the icon, or by choosing another profile. The app and the icon then show "Not connected" (the red dot disappears).
A new profile is selected right after saving, ready for "Connect".
With a server certificate error, the main button is "Review certificate…" (trying again without it does not help); "Try again" is next to the message.
Fixed
Fortinet SSL VPN with newer FortiOS (e.g. FortiGate 100F) reported "malformed SSL VPN message" after a successful sign-in. Server answers that arrive in parts, without a stated length or after an announcement are now read correctly.
0.1.120
New
If the certificate of an SSL VPN or SSTP server fails the check (e.g. a FortiGate's factory certificate), the error offers "Review certificate…": you see the certificate's details and fingerprint and, after confirming, you can trust it. From then on the profile connects only with exactly that certificate, and if it changes, the app asks again.
Improved
The app's connection to its service has a more unique name, so it cannot be confused with other VPN programs on the computer.
SSL VPN and SSTP profiles have a port field, for servers that do not run on 443 (e.g. FortiGate on 10443).
A server certificate error names the server's address and port.
0.1.118
Fixed
The app sometimes reported that the app's service was needed to connect and could not connect until the computer was restarted. The service therefore no longer stops, and if it does stop, Windows restarts it.
0.1.115
Improved
In the list of installed apps in Windows, the publisher is now "Geslar d.o.o.".
Oct 19 – Oct 25, 2026
Vezar 0.1.86–0.1.105
Notes by version
0.1.105
New
Profile backup: all your profiles with saved passwords and keys in one password-protected file (Settings → "Profiles"). Restoring from a backup goes through configuration import and overwrites nothing without your choice.
An OpenVPN or WireGuard profile can be exported as an .ovpn or .conf file (the "⋯" menu next to the profile), with a warning that the keys are in plain text.
0.1.104
Improved
The addresses for support and for reporting security issues are now on geslar.app (info@geslar.app, security@geslar.app).
0.1.99
New
Features that need a plan are shown greyed out, with the name of the plan they need and a "Learn more" link.
If an administrator set rules on the computer (e.g. through Group Policy), the app states clearly in Settings and in "About" that they are not applied. Protection of this computer remains free.
0.1.98beta
Improved
If an administrator policy has a value the app does not understand, the policy is ignored instead of being applied incorrectly, and Settings → “Protect this computer” says so.
0.1.97beta
Improved
“About” has links to the Terms of Use and the Privacy Policy; the open-source list is now called “Third-party software”, and the outdated “Licence” row has been removed. The first installer screen mentions the terms with a link.
0.1.96beta
Improved
Settings no longer offer a choice of update channel: everyone gets verified versions. If you were on the beta channel, Settings will show “Return to stable”.
0.1.94
Fixed
Uninstalling while a VPN connection is active (from Windows Settings or by double-clicking the installer) now really reports that the connection is active and stops; in 0.1.93 this did not work. Upgrading by double-click while a connection is active now shows that message instead of a generic abort.
0.1.93
Improved
Uninstalling while a VPN connection is active reports that the connection is active and stops, instead of dropping the connection; disconnect and uninstall again.
In the advanced settings of IPsec and IKEv2 profiles, “Local network” shows when protection of this computer or an administrator policy applies on a public network.
0.1.92
New
“Protect this computer” now also has “Local network through VPN on public Wi-Fi”: on a network that Windows marks as public (hotel, café), local devices other than the network's router are not reachable while the VPN is connected, for connections where all traffic goes through the VPN.
Improved
A new version is no longer installed while a VPN connection is active or traffic is blocked after a dropped connection — neither automatically nor when IT installs it on the computer; it waits until you disconnect. After installation the app reopens by itself.
0.1.90
Fixed
“What's new” now also shows the changes in versions 0.1.87, 0.1.88 and 0.1.89.
The help for “Automatic updates” and “Channel” in Settings no longer repeats the same text.
0.1.89
New
New setting “Protect this computer” (Settings): the computer's owner can turn on, for all connections, blocking traffic if the VPN connection drops and DNS only through the VPN. The change requires administrator rights; a profile can only be stricter.
Changed
Company policies can no longer turn off network protection or weaken a DNS setting you turned on in a profile; they can only strengthen it.
0.1.88
New
OpenVPN through an HTTP proxy: the proxy from the .ovpn file or entered in the profile (Advanced), with name and password sign-in.
Improved
Better import of OpenVPN profiles from pfSense, OPNsense, OpenVPN Access Server and Sophos (older options, certificate without a password, server certificate verification).
Fixed
The “updated” notification after an automatic update is now shown; turning on automatic updates checks for a new version right away.
0.1.87
Improved
Sign-in window: for each field you choose separately whether it is remembered (e.g. username and key yes, password no).
Fixed
After editing a profile, Connect sometimes asked again for the password or key (PSK) that had just been saved.
When importing from FortiClient, an encrypted username (“Enc…”) is no longer entered as the name; you are asked for it when connecting.
Importing Azure VPN profiles (OpenVPN with a certificate): instead of editing the file by hand, you pick a certificate from the Windows store; if there is only one, it is selected automatically.
0.1.86
New
IPsec (IKEv1) can connect with a shared key only, without a username and password; such profiles from FortiClient are now imported.
IPsec (IKEv1) and L2TP/IPsec can connect with a certificate from the Windows store (with or without a username); such profiles from Windows VPN, Cisco VPN Client and FortiClient are now imported.
IKEv2 user sign-in can also use EAP-TTLS (password inside a TLS connection to the authentication server, as on FortiGate); such profiles from FortiClient are now imported.
Improved
The main window shows all profiles more clearly: the search says how many there are, “All profiles” is below the recent ones, and without recent profiles the first profiles are shown right away.
Fixed
“What's new” in the app now also shows the installed version.
Oct 12 – Oct 18, 2026
Vezar 0.1.53–0.1.84
Notes by version
0.1.84
New
“Block traffic if the connection drops” (in the profile, Traffic and behaviour): when a connection drops unexpectedly, internet access is blocked until the connection comes back by itself or you click “Disconnect” (in the window or in the tray icon menu) — nothing goes around the VPN.
Settings → “Start with the computer”: the app starts when you sign in to Windows, hidden in the tray.
Improved
IKEv2: the connection stays up even when the server periodically asks for a new sign-in (the sign-in renews itself, without interruption).
Fixed
After an update the app opens in front of other windows, not behind them.
0.1.83
New
Profiles on disk are encrypted for the Windows user (addresses, usernames and client names cannot be read from a copy of the disk or by another user); existing profiles are encrypted automatically on first start.
Improved
Sign-in offers “Don't remember”, “Until the app closes” and “On this computer”: a password can be kept only while the app is open (never on disk), and reconnecting then does not ask for sign-in.
“About” has links to security and support information and to open-source licences.
On a computer with several users (e.g. Remote Desktop), connection details and prompts are seen only by the user who opened the connection.
0.1.82
New
SSL VPN (Cisco AnyConnect and Fortinet): faster transfer over UDP (DTLS) when the server offers it; the connection comes up right away, and traffic switches to UDP as soon as it works (if UDP does not get through, everything works as before).
0.1.81
New
SSL VPN (Cisco AnyConnect and Fortinet): networks the server excludes from the tunnel now really bypass the VPN.
SSL VPN (Cisco AnyConnect and Fortinet): sign-in with a certificate from the Windows store, alone or with a username.
SSL VPN (Cisco AnyConnect and Fortinet): sign-in on the company page (SSO, e.g. Microsoft Entra or Okta) in the app window; sign-in in an external browser can be turned on under Advanced.
FortiGate SSL VPN: sign-in with a code (FortiToken) also when FortiGate asks for it on a web form.
Fixed
Help (“?”) under “Advanced” closes when you click anywhere, as in the rest of the app.
With “Certificate and username” (OpenVPN) the password is now saved and sent; previously the entered password was lost.
When the server does not accept the password and asks for it again (e.g. FortiGate IPsec), the app now says so (“The server is asking for the password again”) instead of “Enter code”; the password is entered hidden. With the “Save new password to profile” checkbox, the password is saved only after a successful connection.
0.1.80
New
FortiGate IKEv2 as in newer FortiClient: username and password together with the server's shared key (PSK); for FortiToken, approval on the phone or a code entered when connecting (“Password + code”).
IPsec over TCP for FortiGate (FortiOS 7.4.4+), e.g. when the network does not let UDP through: Advanced → “TCP port”.
Import from FortiClient also recognises IKEv2 connections (with a TCP port) and SSL VPN connections.
Improved
On first start without profiles the app opens “New profile” right away, and the main window explains how to add the first connection.
Fixed
The “+ New profile” link in the profile list is now also in English.
0.1.79
New
Import from VPN programs on the computer: the app finds Windows VPN connections, FortiClient IPsec tunnels, OpenVPN profiles and old Cisco VPN Client profiles (.pcf, with a group key) and imports the ones you select. It does not take passwords and keys that other programs keep protected — it will ask for them on the first connection. Connections that already exist are marked.
The import window also recognises a FortiClient export (.xml) and Azure VpnSettings.xml.
SSL VPN for Cisco (ASA, FTD, Meraki MX) without Cisco's program: the address can also include a group (vpn.firma.hr/group), and the group can be entered in the profile. The app asks for a one-time code (OTP) when connecting.
SSL VPN for FortiGate (FortiOS up to 7.6.2; Fortinet removed it in 7.6.3) without FortiClient, with a FortiToken code when connecting.
Fixed
“About” now has an “Update” button when a new version is available.
A WireGuard configuration from UniFi is imported even without the private key (UniFi shows it only when the client is created): the app creates a new key pair, and you enter the public key in UniFi when adding the client manually.
0.1.77
New
WireGuard connections. The configuration is imported from a .conf file (e.g. from UniFi, MikroTik or pfSense), and without a file the app can create a key pair whose public key you send to the administrator.
Improved
Configuration import: drag, select or paste the file. For OpenVPN and WireGuard profiles, replace the configuration with a new version using “Replace…”, without entering the profile again.
Fixed
Fixes for minor issues.
0.1.76
New
The app is in Croatian and English. The language is chosen in Settings and by default follows the Windows language.
SSTP connections go through the app's own client. For SSTP you can now choose “What goes through the VPN” and DNS, as for other protocols.
The app warns if Windows does not allow leak protection while the VPN is connected.
Improved
Clearer SSTP messages, e.g. when the password is wrong or the server certificate does not match the entered address.
0.1.74
New
“What's new”: changes in recent versions, under “About” and after every upgrade.
Fixed
The list of recent profiles no longer gets a scroll bar when the window is smaller.
Security
Company policies are enforced by the app's own service, so the user cannot bypass them. Changes and deviations are recorded where the user cannot change them and in the Windows event log.
0.1.73
New
Leak protection: while all traffic goes through the VPN, nothing leaves outside it.
DNS choice in the profile: as set by the server, only through the VPN, or together with local DNS.
A company can lock routing and DNS for all profiles; such settings show “Managed by administrator”.
A setting that changes what the VPN server requests asks for confirmation, and when connecting it is shown when it actually differs. Such changes are recorded.
0.1.72
Improved
The profile form shows only the settings that actually work for the selected vendor and protocol; required fields are marked with an asterisk.
The “Vendor” menu is sorted by how common each vendor is and now includes TP-Link Omada and HPE Aruba Instant On.
New choice “What goes through the VPN”: as set by the server, all traffic, or only selected networks.
Fixed
OpenVPN connections now respect “What goes through the VPN” and the address, port and transport from the profile.
An imported OpenVPN file with several servers uses the first one as the main address.
Fixes for minor issues.
0.1.70
Improved
Settings are clearer: a shorter list in groups (Behaviour, Appearance, Support), descriptions behind “?”; what does not work yet is marked “Coming soon”.
A new version is reported as soon as the app starts, and is checked for every 2 hours (previously 6).
New
Settings → Updates: automatic update or notification only, and the channel (stable or beta). An administrator can lock them (Group Policy, RMM or at installation), in which case “Managed by administrator” is shown.
Settings → Support: “Report a problem” opens the support page.
Security: private keys from imported OpenVPN profiles (.ovpn) are stored encrypted for your Windows account, not in the profile file; existing profiles are moved automatically at start.
Update security: the app also knows a backup signing key, so the key can be replaced without interrupting updates.
Fixed
An explanation behind “?” closes when you click anywhere else (previously, in the profile form you had to click “?” again).
Language: EN is marked “coming soon” — in 0.1.68 it could be selected, but the interface stayed in Croatian. English is coming in one of the next versions.
0.1.68
Improved
“About” shows the app logo (as in the header) instead of initials.
0.1.67
New
The app is now called Geslar Vezar and is part of the Geslar ecosystem alongside Geslar Škrinjar and Geslar Ključar.
Data is in a new location: profiles in %APPDATA%\Geslar\Vezar, the log and saved passwords in %LOCALAPPDATA%\Geslar\Vezar. Profiles from earlier test versions are not carried over — import them again.
Installation only as MSI; the NSIS installer and the portable version are no longer released.
Improved
The VPN adapter in Windows (ipconfig, Network Connections) carries the app's name instead of a generic “VPN”, e.g. “Geslar Vezar” with the description “Geslar Vezar Tunnel”.
0.1.66
New
OpenVPN now works through the app's own client: an installed OpenVPN is no longer needed. Supported: UDP and TCP, tls-auth, tls-crypt and tls-crypt-v2, AES-GCM, ChaCha20-Poly1305 and older AES-CBC ciphers, key renewal without dropping the connection, and automatic reconnection when the server stops responding.
OpenVPN sign-in: username and password, one-time code (static and dynamic challenge, e.g. Google Authenticator on OpenVPN Access Server) and sign-in in the browser — the sign-in page opens by itself, and “Open again” opens it once more. When the server asks for the response not to be shown, it is entered hidden.
Import .ovpn together with its files: “Choose file…” opens a Windows dialog and imports the .ovpn with the certificates and keys from the same folder; you can also drag and drop the .ovpn and its files together. If a file is missing, the app names it. The username and password from the file are stored securely, not in the profile.
Certificate from the Windows store for OpenVPN, including from a smart card: select it in the profile (“Certificate”) or the profile names it itself (cryptoapicert). The key never leaves the store.
Password-protected keys (.p12/PKCS#12 and an encrypted key in the .ovpn): the password is asked for when connecting and is not saved.
Improved
On disconnect the OpenVPN server releases the connection immediately, so reconnecting works right away even when the server limits the number of simultaneous connections (e.g. OpenVPN Access Server).
Data recognised during import (server, protocol, user…) is shown one below the other.
“Advanced” and “Traffic and behaviour” open one at a time.
IPsec (IKEv1): when connecting fails, the server is notified of the termination, so no half-open connection is left on it.
Clear messages in Croatian for OpenVPN (wrong key password, certificate not in the store, unsupported option…).
Changed
OpenVPN profiles use only the imported .ovpn file; the old path through an installed OpenVPN has been removed.
0.1.65
New
IKEv2 now works through the app's own client (no longer through Windows VPN). Sign-in: username and password (EAP), shared key (PSK) with a local ID, or a certificate — the computer certificate or your personal one, including from a smart card (Windows asks for the PIN). The list in the profile shows certificates that have a private key; the key never leaves the Windows store.
The server certificate is verified by Windows (authorities the computer trusts, revocation, validity); the name in the certificate must match the server address or “Server name in certificate” in the advanced settings.
IKEv2 supports modern algorithms (AES-GCM, SHA-2, ECP, Curve25519), key renewal without dropping the connection (and PFS when the server requires it), sending large messages in fragments, redirection to another server, and a one-time code or approval on the phone at sign-in.
IKEv2 advanced settings in the tabs “IKE SA”, “Child SA”, “Connection” and “Behaviour”.
Improved
The profile form is shorter and fits in the window without scrolling: label and field are on the same line, explanations open with a click on “?”, and “Advanced” and “Routing and behaviour” are side by side. Fields that have no effect for the selected method are not shown.
Clear messages in Croatian when the server certificate is not valid (name, untrusted authority, revoked, expired), when the server does not accept your certificate, when the password expires or the account is not allowed to connect.
Changed
Existing IKEv2 profiles move to the new client by themselves (sign-in with username and password, without any change); the old Windows VPN entries for those profiles are deleted when the app starts.
0.1.64
New
Two-factor sign-in to an IPsec server (IKEv1 XAUTH): when the server asks for a one-time code (e.g. FortiToken, SMS), a new PIN or an answer, an “Enter code” window opens with the server's message and the remaining time. When the server is waiting for approval on the phone, “Approve the sign-in on your phone…” is shown with a Cancel button. The code is never saved and never written to the log.
IPsec profile → “Password + one-time code”: for FortiToken on FortiGate (which over IKEv1 asks for the code appended to the password). When connecting you enter only the code, and the app sends it after the saved password.
“Backup servers” in the profile (below the address): if the main server does not respond, the app tries the backup servers in turn — for all connection types. Backup servers sent by a Cisco server are used automatically (e.g. when reconnecting). A wrong password does not trigger a switch to a backup server.
IPsec advanced settings → “Fragmentation” (on by default): the server may send large IKE messages in fragments, which is needed for certificates and on networks that drop large UDP packets.
0.1.63
Fixed
When “When I close the window” is set to close the app, X now really quits the app (previously the tray icon stayed and the app could not be opened again).
When a profile cannot be saved (including on import), the reason is shown (e.g. an invalid server address), and it is also in the diagnostic log. The server address may contain an underscore (“_”).
Dark theme: contrast fixed throughout the app (settings, list, forms, dialogs, tray pop-up) — checked by measuring the contrast of every text; in the light theme grey texts are also darker.
The tray pop-up now follows the selected theme; the default theme is “System” (follows Windows).
Improved
“Disconnect after inactivity (min)”: for all connection types; after the set time without traffic the connection is disconnected (without reconnecting) and a “Disconnected due to inactivity” notification arrives. Off by default; the old “Timeout” field never worked and has been replaced by this one.
Settings that do not work yet (Kill switch, Always-on, Bypass, manual DNS servers) are now disabled and marked “coming soon” — previously they could be turned on but had no effect. New profiles no longer save “Kill switch: on”.
New app logo: window, taskbar, notification area and installer icons and the app header (in the dark theme a white shield; the tray and taskbar icon switches to the white shield when the Windows taskbar is dark, and follows the change immediately).
IPsec (IKEv1) connections no longer drop when the sign-in key expires (usually after 8 hours): the client sets up a new sign-in alongside the existing one in time and seamlessly moves traffic to it.
0.1.62
Improved
Settings → “Connection notifications”: shows whether notifications are turned on in Windows; if they are not (e.g. the main “Notifications” switch is off), this is shown in red with a button that opens the Windows notification settings.
For every notification the log also records whether Windows hid it because of its settings.
New — advanced IPsec settings
“Server ID”: if entered, the connection is dropped when the server identifies itself with a different ID (protection against the wrong server); the error message says which ID it used.
“Sign-in time” (default 60 s, up to 5 min): how long to wait for sign-in to complete, e.g. while you approve the sign-in on your phone. In Main mode the client no longer waits forever if the server does not start the sign-in.
“Lifetime in KB”: tunnel keys are also renewed by the amount of traffic.
“Local network”: with a full tunnel the local network can stay reachable (the previous behaviour) or go through the VPN.
“MTU”: packet size in the tunnel (default 1400, as before).
“Identification”: “Standard” or “Cisco” (for Cisco ASA/IOS; do not use on FortiGate).
Removed
L2TP/IPsec no longer connects through the Windows client, only through ours (which also works alongside other VPN clients). That is why the Windows options “IPSec encryption” and “Require encryption” have been removed from the advanced L2TP settings, and the button for the Windows NAT-T registry setting has been removed from the error diagnosis. Existing profiles work without changes.
0.1.61
Fixed
Settings → Diagnostic log → “Open” now opens the log in the app you have for .log files (if there is none, Windows offers “Open with”; otherwise Notepad).
Notifications: the log records Windows's actual response (previously it said “shown” even when Windows did not show the notification), so we can find out why a notification is not visible.
0.1.60
Improved
Smaller, calmer profile names in the list; favourites have a star ★ next to the name.
In the profile form, L2TP/IPsec and IPsec (IKEv1) are marked as older technology, with a note to use them only when the server does not support IKEv2 or SSL VPN.
Password and key fields: a saved value is shown as dots, the explanation is below the field; an empty field says what to enter. The eye icon now toggles on and off with a click.
The app runs only once: starting it again brings back the window that is already open (without a second tray icon).
Tray icon: in Settings and the first time the app goes to the tray, a button that opens the system settings where the icon can be made always visible (Windows does not let the app do this).
Fixed
The “Connected” notification did not arrive when the connection was established in less than a second.
Security: saved passwords and keys are no longer kept in the app's memory, but are decrypted again each time they are used; the test setting for the secrets folder does not exist in the released version.
0.1.59
New
Main screen with more than three profiles: instead of a drop-down menu, a search with a few recently used profiles below it (in Settings: Recent or Favourites). Clicking in the search or typing anywhere in the window brings up the search with the full list (recent, favourites, then clients); it searches by name and client, also without diacritics (č, ć, đ, š, ž). “Connect” appears on the profile under the mouse (on a touch screen always), and the connected profile is marked “● Connected”.
Connecting to another profile while a connection exists asks for confirmation (“Switch connection?”).
Tray icon: left click opens a small window next to the icon (connection state, search and all profiles with “Connect”); right click has only the state, Disconnect, Open and Exit. The icon has a status dot (green connected, yellow connecting, red error). When the app is not in front of you, a Windows notification reports that the connection was established, that connecting failed, or that the connection was dropped (in the installed version; the portable one only if pinned to Start).
Wide window (maximised or stretched beyond 760 px): the profile list with search is always on the left, and on the right the connection state and details (server, protocol, address in the VPN, DNS, connection start).
Fixed
The profile list can be scrolled again when there are more profiles than fit.
When editing a profile with a saved password or key, it says “saved — enter only to change” (previously it wrongly said it would be asked for when connecting).
Password and key in the profile form have an eye icon (shown while held).
Tray menu: “Disconnect” is right below the connected profile and is shown only when there is a connection.
0.1.58
New
The app's own sign-in window when connecting instead of the Windows one: it asks only for what the profile is missing (username, password, shared key), the password and key are hidden (the eye icon shows them only while held), with “Remember on this computer” (protected storage). With a wrong password or key, the window opens again with a message instead of the connection simply failing.
“New profile” has a paste box: paste the details from an email or drag a file (.ovpn, .txt, .json) and the fields fill in by themselves. For lines the app does not recognise it asks “This is…” (username, password, PSK, group ID, server or ignore). If the text contains several profiles, you choose which to import. The separate “Import profile” item has been removed.
Improved
The Croatian terms “šifra” and “ključ” and the group ID are also recognised; a mention of FortiGate means IPsec, not SSL VPN.
A profile can be saved without a password or shared key — they are asked for when connecting.
Security: profiles from older versions that kept a shared key (PSK) from text import as plain text are moved to protected storage automatically at start; a profile with a plain-text secret can no longer be saved.
Tray menu: “Connect ▸” has group headings (Recent:, Favourites:, Others:); the connected profile is marked with a tick, and the first line (“● Connected: …”) is no longer greyed out and opens the window; the icon tooltip shows the state. Menu texts follow the app language (HR/EN).
0.1.57
New
Closing the window (X) sends the app to the tray; the connection stays active. On the first close, a short notification. The behaviour is changed in Settings → “When I close the window” (Minimise to tray / Close the app).
Tray icon menu (right click): connection state, “Connect ▸” (recent, favourites, other profiles), Disconnect, Show, Exit.
A more compact profile list: one line per profile, so about twice as many profiles fit. Profiles without a group are at the bottom under “Other”.
In the profile form, the “Client” field has become “Group in list (optional)”, right below the name, with suggestions of existing groups.
The diagnostic log records traffic through an IPsec/L2TP connection (sent / received / rejected) to make it easier to solve “connected, but not working” problems.
Fixed
A clear message when FortiGate rejects the phase 2 settings (PFS/DH group) instead of a technical code.
0.1.56
Fixed
L2TP/IPsec: the connection no longer drops when the server sends an informational notification (INITIAL-CONTACT) after the first phase. Confirmed on a real server with FortiClient installed.
0.1.55
New
The app's own L2TP/IPsec client instead of the one built into Windows. It also works when other VPN clients (e.g. FortiClient) are installed or active, which did not work with Windows L2TP. Sign-in with MS-CHAPv2 (default), CHAP or PAP.
Import from text: recognised data is shown as labels (password and key hidden), and “Review and save” opens the filled-in form for checking.
Fixed
Import from text: the shared key (PSK) is no longer lost when there is no password in the text; an L2TP profile always has a PSK field; upper and lower case in the key and username stay as written.
Import from text: secrets are stored in protected storage (DPAPI), never in the profile file.
A profile created in the import window is now really saved.
0.1.54
New
The profile form first asks for the server (FortiGate, Cisco, MikroTik, pfSense, OPNsense, Windows Server …), and the protocol menu offers only the protocols that server supports; “Manual” offers all.
IPsec: Main Mode alongside Aggressive Mode (the “Mode” setting under Advanced → Phase 1); the templates for OPNsense, pfSense, MikroTik and Zyxel use Main Mode.
0.1.53
New
Advanced IPsec settings (Phase 1, Phase 2, Connection) with vendor templates and short explanations (“?”).
After connecting through Windows L2TP/SSTP/IKEv2, the assigned IP address and DNS are shown.
Versions up to 0.1.52 are not described here (see the repository history).
6 Nov 2026
Cleaner word list and more metaphors generator
Passphrase generator: cleaned-up word list (awkward and inappropriate words removed, now 6,000+ carefully selected), 1,000+ new Croatian idioms and proverbs in Metaphors mode (2,500+ total), stronger inappropriate-word filter. improved
v1.6April 2026
English language + multilingual website generator
English website — complete EN version of all 15 pages with dedicated URLs (/en/), multilingual engine implemented and EN version deployed new
English phrase dictionary — EFF 7,776 words + 329 English idioms for passphrase generation new
Language picker — HR/EN toggle in the accessibility panel with automatic preference saving new
Automatic language detection — system automatically detects browser language and redirects to the appropriate version new
v1.5February 2026
Croatian letters in phrases and passwords generator
New s→š option in Settings — replaces Croatian letters with ASCII equivalents in phrases (š→s, đ→d, č→c, ć→c, ž→z) and enables more dictionary words new
Same šđčćž option for passwords — adds Croatian letters to the character set for password generation new
v1.4February 2026
Metaphors + browser extension generator
New Dictionaries → Metaphors option — generates passphrase from 1500+ Croatian idioms, phrases and poetic expressions new
Metaphors are exclusive with dialect dictionaries — selecting them automatically unchecks others new
v1.3February 2026
Secure message + contact + improvements
Secure message — send encrypted text via one-time link, zero knowledge new
New Contact page — contact form for direct message to author new
Word count shows direct number of words (2–6) instead of abstract level improved
PWA shortcuts — quick access to Generator, Security and Contact from home screen new
v1.2January 2026
Dialect dictionaries — Croatian dialects
New Dictionaries section in settings — select active dictionaries new
Dark and light theme, generation animations, responsive design, logo and visual identity improved
XSS protection, rate limiting, security HTTP headers, CORS protection fix
Geslar CLI 1.0Oct 6, 2026
Agents for AI tools and service accounts for CI major upgrade
Agents for AI tools — a separate machine identity with access to selected Vaults only, created under Settings → Agents & automation; an agent sees the names and types of items, never their values new
MCP server (geslar mcp serve) — for MCP clients that can start a local stdio server; geslar mcp init writes the entry for Claude Code, Claude Desktop and Cursor new
Approvals with 2FA — an agent reads items only after a person approves with a password and a fresh 2FA code; less than requested may be approved, never more new
Service accounts for CI — the token goes in the CI secret store (GESLAR_SERVICE_TOKEN), no sign-in or unlock, nothing is written to disk; the account's scope and expiry are the approval new
GitHub Action — geslar-eu/secrets-action loads secrets into a job, masked new
Agents and service accounts need a plan that includes them; on a Family plan they belong to the plan's owner
Like Geslar? Recommend it to a friend or colleague.
Take control of your passwords
AES-256-GCM encryption on your device, free for basic use.